Inovonics EN7016 User Manual download pdf

EN7016SK EchoStream

™

Survey Kit

Installation and Operation Manual - 04493D

1 Quick Start

By following this procedure you can quickly configure the supplied

equipment to perform a site survey. Review the main body of this

manual for additional options, features and a more detailed startup

process.

Note: If performing site surveys in Australia or New Zealand, the

additional setup steps in the main body of this manual must be

performed.

1. Slide off the battery cover on the back of the EN4016SK survey

receiver.

2. Load four AA batteries into the survey kit receiver.

3. Press the Power button to turn on the survey kit receiver.

Figure 1 EN4016SK Survey Receiver

4. Press the Enter button to advance to M

AIN MENU.

5. Select R

EGISTER POINT on the MAIN MENU.

6. Select P

OINT 1 on the REGISTER POINT menu.

7. Press the EN1223SK Reset button.

Figure 2 EN1223SK Survey Transmitter

8. Select P

ENDANT. The survey transmitter should now be

registered.

9. Press the EN1223SK On/Off button. The transmit LED should

begin to flash.

10.Use the small flat-blade screwdriver to press the housing

release tab on either end of the ES1210SK and separate the

housing.

11.Select P

OINT 2 on the REGISTER POINT menu.

12.Press the ES1210SK Reset button. The transmitter should now

be registered.

Figure 3 ES1210SK Survey Transmitter

13.Press the ES1210SK On/Off button. The transmit LED should

begin to flash.

14.Place the survey transmitters where you plan to mount your

network coordinator or receiver.

15.Walk the receiver to the first point you plan to use a transmitter

or a two-way end device.

Note: Reversing the position of the end device and the high-power

repeater will make the survey easier to perform. This equipment

reversal will not affect the accuracy of the results.

16.Press Exit to return to the M

AIN MENU.

17.Select P

OINT STATUS on the MAIN MENU.

18.Select P

OINT 1 or POINT 2 to view signal information.

Figure 4 The Point Status Summary Screen

Power

Button

Enter

Button

Exit

Button

Reset

Button

On/Off

Button

Transmit

LED

On/Off

Button

Reset

Button

Frequency

Band

Selection

Pins

Transmit

LED

Signal

Quality

Transmission

Symbols

1 2 3 4 5 6 7

Summary of Contents

Page 1 - Survey Kit

Page 2 - Frequency Band

Page 3

Page 4 - 5 Register End-Devices

Page 5

Page 6 - Transmitters

Page 7 - 10 Warranty/Disclaimer

9 SpecificationsOperating frequency 915-928 MHz (Australia), 921-928 MHz (New Zealand) 902-928 MHz (USA)Operating environment 0°- 60°C (32°- 140°F), 9

Comments to this Manuals

No comments

Inovonics EN7016 User Manual

Browse online or download User Manual for Communication Inovonics EN7016. Inovonics EN7016 User Manual

Summary of Contents

Comments to this Manuals