Inovonics EN4216MR User Manual download pdf

EN4216MR EchoStream® Receiver

Installation and Operation Manual - 05637D, April

4, 2011

1 Overview

The EN4216MR receiver allows you to add up to 16 transmitters and six

outputs to any application. With diversity reception and advanced signal

processing, Inovonics EchoStream technology is designed to minimize

dead spots in transmission areas.

1.1 Installing an Inovonics Security System

An EchoStream survey kit must be used to establish a UL system. The

EchoStream survey kit measures the signal strength of high-power

repeater and sensor messages to help optimize your EchoStream system.

Figure 1 Sample EchoStream System

The EchoStream survey kit provides you with two signal strength

measurements: signal level and signal margin.

Signal level

The signal level is the measurement of the overall decibel level of the

message.

Signal margin

The signal margin is the measurement of the decibel level of the message,

minus the decibel level of any interfering signals. Inovonics Wireless

equipment should be placed within a facility such that all end-devices

produce signal margin readings of at least 4 decibels.

Both the signal level and signal margin are measured in decibels. Because

signal strength and signal margin are measured on a logarithmic scale, the

difference between a decibel level of 3 (Weak) and a decibel level of 4

(Good) is a much larger difference than it would be on a linear scale.

Note: For more information about the EchoStream survey kit, see the EN/

EE7016SK EchoStream® Survey Kit Installation and Operation Manual.

1.2 Inovonics Wireless Contact Information

If you have any problems with this procedure, contact Inovonics Wireless

technical services:

• E-mail: [email protected]

• Phone: (800) 782-2709; (303) 939-9336

1.3 EN4216MR Front Panel

Figure 2 Receiver front panel

Output LED: Lights when any transmitter output is active.

Fault LED: Lights when any transmitter is sending a fault condition.

Power LED: Lit when receiving power.

LCD Display: Shows status, event log and programming information.

Decode LED: Flashes when any recognizable transmission is received.

This LED is only visible when the cover is removed.

Up button: Scrolls the display up.

Down button: Scrolls the display down.

Back button: Returns display to the previous menu, or when pressed in

the main menu options, returns the unit to normal operating mode. When

entering information in the display, returns to the last character entered.

Enter button: Selects the currently displayed menu item. If in normal

operating mode, sets the unit to menu mode.

Reset button: Clears the current status for all points and resets all outputs

and LEDs. Records a receiver reset entry in the event log and resets the

supervision window timers. This button is only accessible when the cover is

removed.

1.4 EN4216MR Internal Components

Figure 3 EN4216MR internal components

2 Power Cabling

Before beginning startup, you will need to connect power to the receiver. To

connect power to the receiver:

1. Connect power cabling to the Vs (+) and GND (-) connections.

• Power source should be 11-14 VDC. Power supply must be

unswitched, uninterrupted, and regulated.

• Use 14 - 22 gauge wire for all cabling, and ensure torque on the screw

terminals does not exceed 7 inch-pounds.

• For UL installations, wire lengths must not exceed 300 feet.

A Output LED B Fault LED C Power LED

D LCD display E Up button F Down button

G Back button H Enter button

A Housing release

tabs

B Power

connections

C Operation LEDs

D Relay outputs E Tamper output F Receiver power loss output

G Jam output H Reset input I Frequency band selection

pins

J Reset button K Decode LED

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1 - EN4216MR EchoStream® Receiver

Page 2 - 9.1 Setup Point

Page 3 - 9.2 Factory Config

Page 4 - 13 Warranty and Disclaimer

Page 5 - Panel Terminal Keypad Text

Page 6

Page 7

Page 8 - Point Point Point Point

Page 9

Page 10

Comments to this Manuals

No comments

Inovonics EN4216MR User Manual

Browse online or download User Manual for Receivers and Amplifiers Inovonics EN4216MR. Inovonics EN4216MR User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Inovonics EN4216MR